Manuals / Toshiba / Computer Equipment / Barcode Reader

Toshiba EO1-33057, B-SX8T SERIES LAN Setting, LAN is disabled LAN and SNMP are enabled, E2-40

Models: EO1-33057D B-SX8T SERIES EO1-33057

1 139

Download 139 pages 1006 b

Page 54

Image 54

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.8 Setting an Operating Environment

2.8.5 LAN Setting	While “<7>LAN” is displayed on the LCD Message Display, press the
	[PAUSE] key to enter the LAN Setting Mode.
	In the LAN Setting Mode, whether to enable the LAN communication
	and SNMP or not is selectable.
	When “<7>LAN” appears, press the [PAUSE] key.

		<7>LAN
		ON SNMP ON
	Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

OFF

ON SNMP ON

ON SNMP OFF

LAN is disabled.

LAN and SNMP are enabled

LAN is enabled but SNMP is disabled.

After selecting the LAN setting, press the [PAUSE] key.

E2-40

Page 54

Image 54

Toshiba EO1-33057 LAN Setting, LAN is disabled LAN and SNMP are enabled, LAN is enabled but SNMP is disabled, E2-40

Contents

B-SX8T SERIES TOSHIBA Barcode PrinterVORSICHT IP20CE Compliance for EU only Schallemission unter 70dB A nach DIN 45635 oder ISOB-SX8T SERIES Owners ManualTOSHIBA Barcode Printer Waste Recycling information for users For safety For all countries and areasFor Europe Safety Summary Meanings of Each SymbolSafety Summary Precautions Request Regarding MaintenancePRODUCT OVERVIEW TABLE OF CONTENTSPRINTER SETUP ON LINE OPERATION4. MAINTENANCE 1.2 Features 1. PRODUCT OVERVIEW1.1 Introduction 1 pc 1.3 AccessoriesSupply Holder Frame L Wing Bolt 2 pcs1.4.2 Front View 1.4.1 Dimensions1.4 Appearance 1.4.3 Rear View1.4.4 Operation Panel 1.4.5 InteriorCaution Label Type 1.5 OptionsOption Name UsageProcedure 2. PRINTER SETUPSetup Flow 2. PRINTER SETUP2.1 Installation 2.2. Assembling the Supply Holder Frame2.3 Connecting the Power Cord Example of US Type2.4 Loading the Media 2.4 Loading the Media Cont 2.4 Loading the Media Cont 11. Feed the media until it extends past the PlatenDetail of Movable Sensor 2.4 Loading the Media ContFixed sensor Movable sensor Detail of Fixed SensorFeed Gap Sensor position adjustment 2.4 Loading the Media ContSensor Black Mark Sensor position adjustment 2.4 Loading the Media Cont2.4 Loading the Media Cont Batch mode2.4 Loading the Media Cont Strip mode Option2.4 Loading the Media Cont Cut mode OptionTag paper or Thick paper 2.4 Loading the Media ContLabel or Thin media Head Lever2.5 Loading the Ribbon 1. Set the Head Lever to the “OPEN” position2. Open the Top Cover, Right Side Cover, and the Head Lock Plate 2.5 Loading the Ribbon Cont 2.5 Loading the Ribbon Cont 7. Close the Head Lock Plate, Right Side Cover, and Top Cover2.6 Connecting the Printer to Your Host Computer 2.7 Turning the Printer ON Power SwitchE2-18 2.8 Setting an Operating Environment How to enter the System ModeThe Parameter Setting Mode contains the following sub menus. Each 2.8.1 Parameter SettingDisplay, press the PAUSE key to enter the Parameter Setting Mode While “2PARAMETER SET” is displayed on the LCD Message2.8.1 Parameter Setting Cont 2 Character Zero Selection1 Character Code Selection 4 Data Length Selection 2.8.1 Parameter Setting Cont3 Baud Rate Selection E2-226 Parity Selection 2.8.1 Parameter Setting Cont5 Stop Bit Length Selection 7 Flow Control Code Selection9 Auto Forward Wait Selection 2.8.1 Parameter Setting Cont8 LCD Language Selection ActivatedPressing the FEED key one time causes a -0.1mm change 2.8.1 Parameter Setting Cont10 Head Up Cut Selection up to -5.0 mm2.8.1 Parameter Setting Cont 11 Ribbon Save Function Selection12 Control Code Selection Transparent ribbon Non transparent ribbon 2.8.1 Parameter Setting Cont13 Ribbon Type Selection E2-2715 FEED Key Function Selection 2.8.1 Parameter Setting Cont14 Strip Wait Status Selection The FEED key will feed one media when17 EURO Code Selection 2.8.1 Parameter Setting Cont16 KANJI Code Selection Windows codeA fall of ACK signal and a release of BUSY occur at the same time 2.8.1 Parameter Setting ContA rise of ACK signal 18 Auto Print Head Check Selection21 Media Sensor Selection 2.8.1 Parameter Setting Cont20 Web Printer Function Selection Unavailable2.8.1 Parameter Setting Cont 22 Input Prime Selection23 Expansion I/O Interface Type Selection 25 Label End/Ribbon End Selection 2.8.1 Parameter Setting Cont24 Plug & Play Selection 2PARAMETER SET PLUG & PLAY OFF27 Reverse Feed Speed Selection 2.8.1 Parameter Setting Cont26 Pre-Strip Selection STD 3 inch/second LOW 2 inch/secondTYPE1 Compatible specification with the B-X series 2.8.1 Parameter Setting Cont28 Maxi Code Specification Selection TYPE2 Specification for specific home delivery company2.8.2 Dump Mode Setting Print Conditions 2.8.2 Dump Mode Setting Cont2. PRINTER SETUP Printing width 3.9 inches 100 mm Sensor selection NoneThe BASIC expansion mode program has already been loaded 2.8.4 Automatic Calibration Not activated Activated Feed gap sensor Activated Black mark sensorE2-39 LAN is enabled but SNMP is disabled 2.8.5 LAN SettingLAN is disabled LAN and SNMP are enabled E2-401 Date Setting 2 Time Setting1. Be sure to load the battery and set 2.8.6 Real Time Clock Setting 3 Low Battery Check SettingCont the low battery check function toWhile holding down the FEED and PAUSE keys, turn on the printer 2.8.7 IP Address Setting TCP/IPPower OFF E2-432.8.7 IP Address Setting TCP/IP Cont FEED and PAUSE keys1 Printer IP Address 2.8.7 IP Address Setting TCP/IP Cont1. Set each 3-digit value by using the RESTART or FEED key This parameter is to set an IP addressRESTART key Increment FEED key Decrement Range 00000 to 2.8.7 IP Address Setting TCP/IP Cont2. Set a number for each digit by using the RESTART or A number exceeding 65535 will be automatically corrected to2. Set a character or value for each byte by using the 2.8.7 IP Address Setting TCP/IP ContThis parameter is to enable DHCP 5 DHCPSP = Space 2.8.7 IP Address Setting TCP/IP Cont2. PRINTER SETUP PAUSE2.9 Installing the Printer Drivers 2.9.1 Introduction2.9.2 General Description 2.9.3 Installing the Printer Driver 1 Parallel InterfaceWindows 98/Me E2-51E2-52 Windows 2000/XP E2-53E2-54 Installation starts by the operating system’s plug-and-play function 3 Select “Search for the best driver for your device. Recommended” E2-57 E2-58 Finish button E2-59E2-60 7 Select “Search for the best driver in these locations” E2-62 2.9.4 Uninstalling the Printer Driver E2-632.9.5 Adding/Deleting a LAN Port 1 Adding a LAN Port Windows 98/MEE2-65 2.9.6 Cautions 1 Printer Driver Upgrades2 Others 2.9.7 Using the Printer Driver 2.10 Print Test Adjustment2.10 Print Test Cont When using an optional Cutter Module or Strip Module2 Cut/Strip Position Fine Adjustment 2.11 Position and Print Tone Fine Adjustment1 Feed Amount Fine Adjustment 4 X-coordinate Fine AdjustmentTone Fine Adjustment Cont2.11 Position and Print Print Start Position Fine AdjustmentChoose a desired value by using the RESTART or FEED key Adjustment ContCut/Strip Position Fine Adjustment Example of Cut Position Fine AdjustmentExample of Strip Position Fine Adjustment E2-73Example of Reverse Feed Amount Fine Adjustment Adjustment ContReverse Feed Amount Fine Adjustment 2.11 Position and PrintChoose a desired value by using the RESTART or FEED key Adjustment ContX Coordinate Fine Adjustment Example of X Coordinate Fine Adjustment2.11 Position and Print Tone Fine Adjustment Cont Print Tone Fine Adjustment3ADJUST SET RBN ADJFW RBN ADJFW +0 RBN ADJFW RBN ADJFW RBN ADJFW 2.11 Position and Print Tone Fine Adjustment ContRibbon Motor Voltage Fine Adjustment 3ADJUST SET RBN ADJBK RBN ADJBK +10 RBN ADJBK +9 RBN ADJBK +82.12 Threshold Setting 5 Feed Gap Sensor Adjustment 2.12 Threshold Setting Cont3 Black Mark Sensor Adjustment 7 Black Mark Sensor/Feed Gap Sensor Adjustment No media„ When using the Feed Gap Sensor 2.12 Threshold Setting Cont„ When using the Black Mark Sensor Voltage at a black mark Midpoint Threshold voltage2.12 Threshold Setting Cont „ Manual Threshold Setting„ Storing a “No Media Level” Voltage 2.12 Threshold Setting Cont 3 Press the PAUSE key until the target sensor type is displayed3. ON LINE OPERATION 3.1 Operation Panel3.3 Reset 3.2 OperationSection 5 TROUBLESHOOTING and APPENDIX 4.1.1 Print Head/Platen 4. MAINTENANCE4.1 Cleaning 4. Do not pour water directly onto the printer4.1.1 Print Head/Platen Cont 4.1.2 Pinch Roller 4.1.2 Pinch Roller Cont 4.1.2 Pinch Roller Cont 12. Attach the Ribbon End Sensor Plate to the printer2. Set the Head Lever to the “OPEN” position 1. DO NOT POUR WATER directly onto the printer 4.1.4 Covers and Panels2. DO NOT APPLY cleaner or detergent directly onto any cover or panel 3. NEVER USE THINNER OR OTHER VOLATILE SOLVENT on the plastic covers4.1.5 Optional Cutter Module 1. Be sure to turn the power off before cleaning the cutter unitCutter Blade 4. MAINTENANCECont HookCare must be taken not to pinch your fingers or hands 2. Remove jammed media or backing paper, if any5. TROUBLESHOOTING 5.1 Error Messages5.1 Error Messages Cont RESTART keyENGLISH VERSION EO1-33057 5.2 Possible Problems 5.2 Possible Problems5.1 Error Messages Cont RESTART keySolutions 5.2 Possible Problems ContPossible Problems Causes5.3 Removing Jammed Media Do not use any tool that may damage the Print Head5.3 Removing Jammed Media Cont 6. PRINTER SPECIFICATIONS ModelB-SX8T-TS12-QM-R Available bar code types Available two-dimensional code 7. SUPPLY SPECIFICATIONS 7.1 Media7.1.1 Media Type 7.1.2 Detection Area of the Transmissive Sensor LabelTag paper with square holes 7.1.3 Detection Area of the Reflective Sensor 7.1.4 Effective Print Area7.2 Ribbon 7.3 Recommended Media and Ribbon Types1 Media type 7.4 Care/Handling of Media and Ribbon 2 Ribbon type3 Combination of Media and Ribbon APPENDIX 1 MESSAGES AND LEDS Symbols in the messagePage Example ESC XR 0200, 0300, 0450, 1200, 1, LF NUL Command error NOTE Description of Command ErrorExample ESC T20 G30 LF NUL Command error Example ESC PC001 0A00, 0300, 2, 2, A, 00, B LF NUL Command errorAPPENDIX 2 INTERFACE Parallel interface CentronicsConnector IEEE1284-B ConnectorAPPENDIX 2 INTERFACE Series B Plug USB interfaceStatus with the receive buffer free space information 10BASE-T UTP category 3 or categorySerial interface Option B-SA704-RS-QM-R RFIDB-SX708-RFID-U2-EU-R Wireless LAN Option B-SA704-WLAN-QM-R RFC826, HTTPD RFC1866, TELNET, FTPD RFC959, DHCP RFC2131Expansion I/O Interface Option B-SA704-IO-QM-R N.C. No ConnectionAPPENDIX 3 POWER CORD When purchasing the power cordAPPENDIX 3 POWER CORD APPENDIX 4 PRINT SAMPLES FontAPPENDIX 4 PRINT SAMPLES Cont APPENDIX 4 PRINT SAMPLESEA4-2 APPENDIX 4 PRINT SAMPLES Cont Bar codesAPPENDIX 4 PRINT SAMPLES Cont UPC-A+5 digitsAPPENDIX 5 GLOSSARIES Expansion I/O InterfacePrint speed INDEX Page EO1-33057D