Manuals / Toshiba / Computer Equipment / Barcode Reader

Toshiba EO1-33057 Parameter Setting Cont, Web Printer Function Selection, Media Sensor Selection

Models: EO1-33057D B-SX8T SERIES EO1-33057

1 139

Download 139 pages 1006 b

Page 45

(20) Web Printer Function Selection

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.8 Setting an Operating Environment

2.8.1Parameter Setting (Cont.)

NOTE:

When “WEB PRINTER ON” is selected, the status of the printer connected in a network can be checked through the Web browser.

(20) Web Printer Function Selection

This parameter is to choose whether to use the printer as a web printer. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET WEB PRINTER OFF

Use the [FEED] or [RESTART] key to select a desired option.

							Unavailable

	[RESTART]					WEB PRINTER OFF

		[FEED]					Available
		[FEED]				WEB PRINTER ON	Available

After selecting the Web printer function, press the [PAUSE] key.

(21) Media Sensor Selection

This parameter is to choose the media sensor type to be used.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET SENS POSI CENTER

Use the [FEED] or [RESTART] key to select a desired option.

								Fixed sensor

	[RESTART]					SENS POSI	CENTER

		[FEED]						Movable sensor
		[FEED]				SENS POSI	EDGE	Movable sensor

After selecting the media sensor type, press the [PAUSE] key.

E2-31

Image 45

Toshiba EO1-33057 Parameter Setting Cont, Web Printer Function Selection, Media Sensor Selection, Unavailable, Available

Contents

TOSHIBA Barcode Printer B-SX8T SERIESCE Compliance for EU only IP20VORSICHT Schallemission unter 70dB A nach DIN 45635 oder ISOB-SX8T SERIES Owners ManualTOSHIBA Barcode Printer Waste Recycling information for users For safety For all countries and areasFor Europe Safety Summary Meanings of Each SymbolSafety Summary Request Regarding Maintenance PrecautionsPRINTER SETUP TABLE OF CONTENTSPRODUCT OVERVIEW ON LINE OPERATION4. MAINTENANCE 1.2 Features 1. PRODUCT OVERVIEW1.1 Introduction Supply Holder Frame L 1.3 Accessories1 pc Wing Bolt 2 pcs1.4 Appearance 1.4.1 Dimensions1.4.2 Front View 1.4.3 Rear View1.4.4 Operation Panel 1.4.5 InteriorCaution Label Option Name 1.5 OptionsType UsageSetup Flow 2. PRINTER SETUPProcedure 2. PRINTER SETUP2.2. Assembling the Supply Holder Frame 2.1 InstallationExample of US Type 2.3 Connecting the Power Cord2.4 Loading the Media 2.4 Loading the Media Cont 11. Feed the media until it extends past the Platen 2.4 Loading the Media ContFixed sensor Movable sensor 2.4 Loading the Media ContDetail of Movable Sensor Detail of Fixed SensorFeed Gap Sensor position adjustment 2.4 Loading the Media ContSensor 2.4 Loading the Media Cont Black Mark Sensor position adjustment2.4 Loading the Media Cont Batch mode2.4 Loading the Media Cont Strip mode Option2.4 Loading the Media Cont Cut mode OptionLabel or Thin media 2.4 Loading the Media ContTag paper or Thick paper Head Lever2.5 Loading the Ribbon 1. Set the Head Lever to the “OPEN” position2. Open the Top Cover, Right Side Cover, and the Head Lock Plate 2.5 Loading the Ribbon Cont 7. Close the Head Lock Plate, Right Side Cover, and Top Cover 2.5 Loading the Ribbon Cont2.6 Connecting the Printer to Your Host Computer 2.7 Turning the Printer ON Power SwitchE2-18 How to enter the System Mode 2.8 Setting an Operating EnvironmentDisplay, press the PAUSE key to enter the Parameter Setting Mode 2.8.1 Parameter SettingThe Parameter Setting Mode contains the following sub menus. Each While “2PARAMETER SET” is displayed on the LCD Message2.8.1 Parameter Setting Cont 2 Character Zero Selection1 Character Code Selection 3 Baud Rate Selection 2.8.1 Parameter Setting Cont4 Data Length Selection E2-22XON/XOFF mode XON/XOFF+READY/BUSY DTR mode READY/BUSY DTR mode 2.8.1 Parameter Setting ContXON/XOFF mode RTS mode 5 Stop Bit Length Selection8 LCD Language Selection 2.8.1 Parameter Setting Cont9 Auto Forward Wait Selection Activated10 Head Up Cut Selection 2.8.1 Parameter Setting ContPressing the FEED key one time causes a -0.1mm change up to -5.0 mm2.8.1 Parameter Setting Cont 11 Ribbon Save Function Selection12 Control Code Selection 13 Ribbon Type Selection 2.8.1 Parameter Setting ContTransparent ribbon Non transparent ribbon E2-2714 Strip Wait Status Selection 2.8.1 Parameter Setting Cont15 FEED Key Function Selection The FEED key will feed one media when16 KANJI Code Selection 2.8.1 Parameter Setting Cont17 EURO Code Selection Windows codeA rise of ACK signal 2.8.1 Parameter Setting ContA fall of ACK signal and a release of BUSY occur at the same time 18 Auto Print Head Check Selection20 Web Printer Function Selection 2.8.1 Parameter Setting Cont21 Media Sensor Selection Unavailable2.8.1 Parameter Setting Cont 22 Input Prime Selection23 Expansion I/O Interface Type Selection 24 Plug & Play Selection 2.8.1 Parameter Setting Cont25 Label End/Ribbon End Selection 2PARAMETER SET PLUG & PLAY OFF26 Pre-Strip Selection 2.8.1 Parameter Setting Cont27 Reverse Feed Speed Selection STD 3 inch/second LOW 2 inch/second28 Maxi Code Specification Selection 2.8.1 Parameter Setting ContTYPE1 Compatible specification with the B-X series TYPE2 Specification for specific home delivery company2.8.2 Dump Mode Setting 2. PRINTER SETUP 2.8.2 Dump Mode Setting ContPrint speed 4”/sec Printing mode Depends on the selection in use Print ConditionsThe BASIC expansion mode program has already been loaded 2.8.4 Automatic Calibration Not activated Activated Feed gap sensor Activated Black mark sensorE2-39 LAN is disabled LAN and SNMP are enabled 2.8.5 LAN SettingLAN is enabled but SNMP is disabled E2-402 Time Setting 1 Date SettingCont 2.8.6 Real Time Clock Setting 3 Low Battery Check Setting1. Be sure to load the battery and set the low battery check function toPower OFF 2.8.7 IP Address Setting TCP/IPWhile holding down the FEED and PAUSE keys, turn on the printer E2-43FEED and PAUSE keys 2.8.7 IP Address Setting TCP/IP Cont1. Set each 3-digit value by using the RESTART or FEED key 2.8.7 IP Address Setting TCP/IP Cont1 Printer IP Address This parameter is to set an IP address2. Set a number for each digit by using the RESTART or 2.8.7 IP Address Setting TCP/IP ContRESTART key Increment FEED key Decrement Range 00000 to A number exceeding 65535 will be automatically corrected toThis parameter is to enable DHCP 2.8.7 IP Address Setting TCP/IP Cont2. Set a character or value for each byte by using the 5 DHCP2. PRINTER SETUP 2.8.7 IP Address Setting TCP/IP ContSP = Space PAUSE2.9 Installing the Printer Drivers 2.9.1 Introduction2.9.2 General Description 1 Parallel Interface 2.9.3 Installing the Printer DriverE2-51 Windows 98/MeE2-52 E2-53 Windows 2000/XPE2-54 Installation starts by the operating system’s plug-and-play function 3 Select “Search for the best driver for your device. Recommended” E2-57 E2-58 E2-59 Finish buttonE2-60 7 Select “Search for the best driver in these locations” E2-62 E2-63 2.9.4 Uninstalling the Printer Driver1 Adding a LAN Port Windows 98/ME 2.9.5 Adding/Deleting a LAN PortE2-65 2.9.6 Cautions 1 Printer Driver Upgrades2 Others 2.9.7 Using the Printer Driver Adjustment 2.10 Print TestWhen using an optional Cutter Module or Strip Module 2.10 Print Test Cont1 Feed Amount Fine Adjustment 2.11 Position and Print Tone Fine Adjustment2 Cut/Strip Position Fine Adjustment 4 X-coordinate Fine Adjustment2.11 Position and Print Adjustment ContTone Fine Print Start Position Fine AdjustmentCut/Strip Position Fine Adjustment Adjustment ContChoose a desired value by using the RESTART or FEED key Example of Cut Position Fine AdjustmentE2-73 Example of Strip Position Fine AdjustmentReverse Feed Amount Fine Adjustment Adjustment ContExample of Reverse Feed Amount Fine Adjustment 2.11 Position and PrintX Coordinate Fine Adjustment Adjustment ContChoose a desired value by using the RESTART or FEED key Example of X Coordinate Fine AdjustmentPrint Tone Fine Adjustment 2.11 Position and Print Tone Fine Adjustment ContRibbon Motor Voltage Fine Adjustment 2.11 Position and Print Tone Fine Adjustment Cont3ADJUST SET RBN ADJFW RBN ADJFW +0 RBN ADJFW RBN ADJFW RBN ADJFW 3ADJUST SET RBN ADJBK RBN ADJBK +10 RBN ADJBK +9 RBN ADJBK +82.12 Threshold Setting 3 Black Mark Sensor Adjustment 2.12 Threshold Setting Cont5 Feed Gap Sensor Adjustment 7 Black Mark Sensor/Feed Gap Sensor Adjustment No media„ When using the Black Mark Sensor 2.12 Threshold Setting Cont„ When using the Feed Gap Sensor Voltage at a black mark Midpoint Threshold voltage2.12 Threshold Setting Cont „ Manual Threshold Setting„ Storing a “No Media Level” Voltage 3 Press the PAUSE key until the target sensor type is displayed 2.12 Threshold Setting Cont3.1 Operation Panel 3. ON LINE OPERATION3.3 Reset 3.2 OperationSection 5 TROUBLESHOOTING and APPENDIX 4.1 Cleaning 4. MAINTENANCE4.1.1 Print Head/Platen 4. Do not pour water directly onto the printer4.1.1 Print Head/Platen Cont 4.1.2 Pinch Roller 4.1.2 Pinch Roller Cont 12. Attach the Ribbon End Sensor Plate to the printer 4.1.2 Pinch Roller Cont2. Set the Head Lever to the “OPEN” position 2. DO NOT APPLY cleaner or detergent directly onto any cover or panel 4.1.4 Covers and Panels1. DO NOT POUR WATER directly onto the printer 3. NEVER USE THINNER OR OTHER VOLATILE SOLVENT on the plastic covers1. Be sure to turn the power off before cleaning the cutter unit 4.1.5 Optional Cutter ModuleCont 4. MAINTENANCECutter Blade Hook2. Remove jammed media or backing paper, if any Care must be taken not to pinch your fingers or hands5.1 Error Messages 5. TROUBLESHOOTINGRESTART key 5.1 Error Messages Cont5.1 Error Messages Cont 5.2 Possible ProblemsENGLISH VERSION EO1-33057 5.2 Possible Problems RESTART keyPossible Problems 5.2 Possible Problems ContSolutions CausesDo not use any tool that may damage the Print Head 5.3 Removing Jammed Media5.3 Removing Jammed Media Cont 6. PRINTER SPECIFICATIONS ModelB-SX8T-TS12-QM-R Available bar code types Available two-dimensional code 7. SUPPLY SPECIFICATIONS 7.1 Media7.1.1 Media Type 7.1.2 Detection Area of the Transmissive Sensor LabelTag paper with square holes 7.1.4 Effective Print Area 7.1.3 Detection Area of the Reflective Sensor7.2 Ribbon 7.3 Recommended Media and Ribbon Types1 Media type 7.4 Care/Handling of Media and Ribbon 2 Ribbon type3 Combination of Media and Ribbon Symbols in the message APPENDIX 1 MESSAGES AND LEDSPage Example ESC T20 G30 LF NUL Command error NOTE Description of Command ErrorExample ESC XR 0200, 0300, 0450, 1200, 1, LF NUL Command error Example ESC PC001 0A00, 0300, 2, 2, A, 00, B LF NUL Command errorParallel interface Centronics APPENDIX 2 INTERFACEConnector IEEE1284-B ConnectorAPPENDIX 2 INTERFACE Status with the receive buffer free space information USB interfaceSeries B Plug 10BASE-T UTP category 3 or categorySerial interface Option B-SA704-RS-QM-R RFIDB-SX708-RFID-U2-EU-R RFC826, HTTPD RFC1866, TELNET, FTPD RFC959, DHCP RFC2131 Wireless LAN Option B-SA704-WLAN-QM-RN.C. No Connection Expansion I/O Interface Option B-SA704-IO-QM-RAPPENDIX 3 POWER CORD When purchasing the power cordAPPENDIX 3 POWER CORD Font APPENDIX 4 PRINT SAMPLESAPPENDIX 4 PRINT SAMPLES Cont APPENDIX 4 PRINT SAMPLESEA4-2 Bar codes APPENDIX 4 PRINT SAMPLES ContUPC-A+5 digits APPENDIX 4 PRINT SAMPLES ContExpansion I/O Interface APPENDIX 5 GLOSSARIESPrint speed INDEX Page EO1-33057D