Toshiba B-SX8T SERIES, EO1-33057D owner manual Loading the Media

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.4 Loading the Media

2.4 Loading the Media

WARNING!

1.Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to load the media once the printer has stopped moving completely.

2.The Print Head becomes hot immediately after printing. Allow it to cool before loading the media.

3.Care must be taken not to pinch your fingers when opening or closing the Top Cover or Right Side Cover.

4.Be careful not to pinch your fingers by the Supply Holder Frame or Media Holders when loading the media.

The following procedure shows the steps to properly load the media into the printer so that it feeds straight and true through the printer.

Use the same procedure when replacing the media, also. The printer prints both labels and tags.

1.Install one of the Media Holders onto the Supply Shaft.

Media Holder

Supply Shaft

2.Turn the Locking Lever of the Media Holder to “Close” position to fix the Supply Shaft with the Media Holder.

Media Holder

Locking Lever

Close Open

Supply Shaft

NOTE:

For the specification of available media, refer to Section 7.1 Media.

3.Place a media roll onto the Supply Shaft and push the media against the Media Holder.

Supply Shaft Media

E2- 4