Toshiba B-SX8T SERIES, EO1-33057D owner manual Print Head/Platen Cont 4.1.2 Pinch Roller

4. MAINTENANCE

ENGLISH VERSION EO1-33057

4.1 Cleaning

4.1.1Print Head/Platen (Cont.)

4.1.2 Pinch Roller

7.Wipe the Platen with a soft cloth slightly moistened with absolute ethyl alcohol

Platen

1.Turn off the power and unplug the printer.

2.Set the Head Lever to the “OPEN” position.

3.Open the Top Cover and Right Side Cover.

4.Open the Head Lock Plate.

5.Turn the Pinch Roller Lever clockwise to release the Pinch Roller.

NOTE:

Be sure to set the Head Lever to Position 2, otherwise the Pinch Roller cannot be removed.

Head Lever

Position 2

CAUTION!

Do not pull hard on the Ribbon End Sensor Plate. Doing so may damage the Ribbon End Sensor Harness, causing a printer failure.

Pinch Roller Lever

6.Remove the ribbon and media from the printer.

7.Set the Head Lever to the Position 2.

8.Remove the White Screw and detach the Ribbon End Sensor Plate in the direction of the arrows.

Ribbon End Sensor

Plate

White Screw

1

2

Ribbon End Sensor

Plate

E4- 2