Toshiba EO1-33057D, B-SX8T SERIES owner manual Operation, Reset, TROUBLESHOOTING and APPENDIX

3. ON LINE OPERATION

ENGLISH VERSION EO1-33057

3.2 Operation

3.2 Operation

NOTE:

For the meaning of error messages and actions to be taken, refer to

Section 5 TROUBLESHOOTING and APPENDIX 1.

When the printer is turned on, the “ON LINE” message appears on the LCD Message Display. It is shown during standby or normal printing.

1.The printer is turned on, standing by, or printing.

ON LINE

B-SX8T V1.0A

2.If any error occurs during printing, an error message appears. The printer stops printing automatically. (The number on the right side shows the remaining number of media to be printed.)

NO PAPER 125

B-SX8T V1.0A

3.To clear an error, press the [RESTART] key. The printer resumes printing.

ON LINE

B-SX8T V1.0A

4. If the [PAUSE] key is pressed during printing, the printer stops printing temporarily. (The number on the right side shows the remaining number of media to be printed.)

PAUSE 52

B-SX8T V1.0A

5.When the [RESTART] key is pressed, the printer resumes printing.

ON LINE

B-SX8T V1.0A

3.3 Reset

NOTE:

If the [RESTART] key is held for less than 3 seconds when the printer is in an error or pause state, the printer restarts printing. However, when a communication error or command error occurs, the printer returns to an idle condition.

A reset operation clears the print data sent from the computer to the printer, and returns the printer to an idle condition.

1.The printer is turned on, standing by, or printing.

ON LINE

B-SX8T V1.0A

2.To stop printing, or clear the data sent from the computer, press the [PAUSE] key. The printer stops printing.

PAUSE 52

B-SX8T V1.0A

3.Press and hold the [RESTART] key for 3 seconds or longer.

<1>RESET

4.Press the [PAUSE] key. The data sent from the computer will be cleared, and the printer returns to an idle condition.

ON LINE

B-SX8T V1.0A

E3- 2