Toshiba EO1-33057D Loading the Media Cont, Feed the media until it extends past the Platen

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.4 Loading the Media

2.4Loading the Media (Cont.)

WARNING!

Be careful not to pinch your fingers or hands by the Supply Holder Frame or Media Holders when loading the media.

NOTE:

Place the bushes of the Supply Shaft into the notches of the Supply Holder Frame securely.

Bush

Notch

9.Loosen the Media Guide Screws on the printer back, and move the Media Guides outside.

Media Guide

Media Guide Screw

Supply Holder Frame

10.Place the assembled Media Holder onto the Supply Holder Frame, and feed the media between the two Media Guides.

Turn the Locking Lever of the Media Holder to the “Open” position, and push the Media Holders toward the centre to place the media at the centre on the Supply Shaft. Then, lock the position of the media by returning the Locking Levers to the “Close” position.

Media Holder

Media

Close Open

Media Holder Frame

11.Feed the media until it extends past the Platen.

12.Move the Media Guides inside, causing the media to be automatically centred. Then, tighten the Media Guide Screws to secure the Media Guides.

Media Guide

Media Guide Screw

E2- 6