Toshiba EO1-33057D, B-SX8T SERIES Loading the Media Cont, Black Mark Sensor position adjustment

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.4 Loading the Media

2.4Loading the Media (Cont.)

NOTE:

Be sure to set the Black Mark Sensor to detect the centre of the black mark, otherwise a paper jam or no paper error may occur.

Black Mark Sensor position adjustment

When using media with black marks, the Black Mark Sensor is used to detect the print start position.

(1)Pull the media about 500 mm out of the front of the printer, turn the media back on it’s self and feed it under the print head.

Black Mark

Media

(2)Move the Movable Sensor by rotating the Adjustment Knob, until the Black Mark Sensor aligns with a black mark. (The left side hole indicates the position of the Black Mark Sensor).

Left side hole:	Right side hole:
Black Mark Sensor	Feed Gap Sensor

Backward

Forward

Media

Adjustment

Knob

E2- 9