Toshiba EO1-33057D, B-SX8T SERIES owner manual Parameter Setting Cont, Ribbon Type Selection, E2-27

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.8 Setting an Operating Environment

2.8.1Parameter Setting (Cont.)

When “CODE MANUAL” is selected and the [PAUSE] key is pressed, the LCD display will show the setting screen of CONTROL CODE1 to CONTROL CODE3 as follows.

<2>PARAMETER SET CONTROL CODE1 1B

CONTROL CODE1 FF

[RESTART]	CONTROL CODE1 FE
	CONTROL CODE1 FD
[FEED]	CONTROL CODE1 02
	CONTROL CODE1 01
	CONTROL CODE1 00

After setting the control code for Control Code 1, press the [PAUSE] key to show the CONTROL CODE2 screen. In a same manner, press the [PAUSE] key after setting the control code for Control Code 2 to display the CONTROL CODE3 screen.

CONTROL CODE1

[PAUSE]

CONTROL CODE2

[PAUSE]

CONTROL CODE3

Press the [PAUSE] key after setting the control code for Control Code 3.

(13) Ribbon Type Selection

This parameter is to choose a ribbon type to be used.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET RIBBON TRANS

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

RIBBON TRANS

RIBBON NON TRANS

Transparent ribbon

Non transparent ribbon

After selecting a ribbon type, press the [PAUSE] key.

E2-27