SYSTEM CONNECTIONS |
|
| EN 63 | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
[A] Using USB cable |
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To USB | USB cable | To USB |
| (provided) | connector |
PC
[B] Using DV cable
OR
Power Switch
Core filter |
| Core filter |
To DV | DV cable | To DV |
IN/OUT | (optional) | connector |
VIDEO/MEMORY
Switch (Open the LCD monitor to access this switch.)
PC with DV connector
Connection To A Personal Computer
[A] Using USB cable
This camcorder can transfer still images to a PC by using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.
3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.
4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.
•Refer to the instruction manual of the software on how to transfer a still image to the PC.
5 When finished, turn off the PC first, then the camcorder.
NOTES:
●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.
●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).
●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with a DV
●When using a DV cable, be sure to use the optional JVC
●The system may not work properly depending on the PC or capture board you are using.
“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.
