Status via Ipmi | Minicom Advanced Systems DX User IP instruction

USER GUIDE

quit - Logs out current user and disconnects from the client. version - Shows all available version numbers

terminal - Starts the terminal passthrough mode for serial port 1. The key sequence `<esc> exit' switches back to command modus.

23.Status via IPMI

The Status via IPMI function shows the current values and the min/max-thresholds of all fans, temperatures and voltages existing in the host system. Change the thresholds by editing the values and pressing Apply.

The first time you call this page, it can take up to two minutes until the sensor data appears.

Note: If IPMI is disabled, Status via IPMI and System Log via IPMI are not available (the menu options are not visible).

24.Event Log via IPMI

The Event Log via IPMI accesses the SEL (System Event Log) repository and reads every entry sequentially. The first time you use this function after starting DX User IP the complete repository has to be read, what may take 1 or 2 minutes.

After reading all entries, DX User IP displays them with their time, sensor and description in accordance with the filter settings. You have the choice between several pre-settings (i.e. last day, last week) or an exact declaration of the start and the end date.

Once you change the filter settings, click `Update' to update the shown entries. If the Get sensor names box is checked, all sensor IDs are shown with their respective names.

The time shown in the log entries is the SEL time, meaning it is independent of the system time. The SEL time is shown at the top of the log table. Click Clear Event Log to delete all entries in the SEL repository.

25.File transfer – Virtual Floppy

This feature does not currently work.

26.Power Control

The appearance of the power control window depends on the power control option connected to DX User IP and on the currently activated setting (discussed on page 40). There are 4 options available: Power control disabled. Internal power. External power. Power control via IPMI.

20

Image 21

Minicom Advanced Systems DX User IP manual Status via Ipmi, Event Log via Ipmi, File transfer Virtual Floppy, Power Control

Contents

DX User IP User Guide Table of Contents User Guide Technical precautions WelcomeTrademarks LAN / WAN Introduction Features of DX User IP DX User IP componentsCables DX User IP front panel Reset buttonsDX User IP rear panel Serial port Rack mounting the DX User IP Pre-installation guidelinesMouse synchronization limitations Terminal port Motion tab Connecting the DX User IP to the Wan/LAN Disable Active DesktopDX User IP connections Connecting an RS232 terminal Local UserMbps connection Configuring the system Order of powering onConfiguration via Dhcp server Configuration via local console Connect To box Hyperterminal Via the IP Device Setup utility DX User IP system interfaceVia Ethernet Crossover connection Logging Login screen Timeout Remote Console SettingsWork area Transmission Encoding Remote Console Settings Remote Console Type Various Remote Console Options Access via Telnet Telnet server commandsTelnet Console Status via Ipmi Power ControlEvent Log via Ipmi File transfer Virtual Floppy Internal Power Control Internal power External power Keyboard & Mouse Settings Fixed Mouse speed Auto Mouse speed Mouse settings KVM Settings Active Port Default configurationNumber of Ports Duration of Pause KVM Port Settings KVM Port Settings Inserting a socket Appending a socket Enable local video port Video SettingsChanging the order Noise filter Custom Video Modes window Custom Video Modes Existing user User/Group Management New user name Password / Confirm passwordFull user name Email address /Mobile number Copy User Modify User buttonGroup Management Create group button Copy Group User/Group Permissions Network Settings Network Settings IP address IP auto configurationSubnet mask Gateway IP address Dynamic DNS Dynamic DNS Settings Serial Port Serial Port Settings DX User IP External Power Option for Serial port External Power Option Serial Port 2 external power option Security Settings SSL Certificate Management SSL settings CSR IP Access Control Telnet Settings Anti Brute Force Settings Snmp Settings You can change the following parameters DX User IP Snmp MIB Ipmi Settings Ipmi Settings Ldap Settings Ldap Settings Updating firmware Maintenance Direct SmartIP Links Maintenance Features Icon Meaning Icons are color coded as follows Include/modify custom Html code Access the Datafile for support Accessing the remote console Keyboard layoutGo to the DX Operating Guide Control buttons /toolbar icons User Guide Chat window Chat window Mouse synchronization Video Settings access Choose Options / Mouse Handling / Intelligent Sync Single mouse mode Frequently Asked Questions Glossary of terms Appendix a DX User IP Video modes Appendix B Key codes Key Appendix C Pin assignments RJ 45 Connector Ethernet Serial SUB-D 9 Connector Windows 98 SE and Windows NT4 Windows 98 and Windows MENetWare 6 servers running Java NetWare 6 servers running Java 1.3.1 CSP8 or CSP9 Linux Appendix E Technical specifications User Guide Feedback Regional Offices