Minicom Advanced Systems DX User IP manual KVM Port Settings

USER GUIDE

Figure 21 KVM Port Settings

29.KVM Port Settings

1.Assign names for each port.

2.Define hotkeys to switch to each port.

Choose either Minicom default hotkeys by selecting Minicom KVM-Switch in the Default configuration box, and then click the Set Defaults button.

Or choose your own hotkeys. The syntax to define a new hotkey is as follows: <keycode> [ + - * ] <keycode>.

For example LShift-LShift-*1-Enter. A + sign means that the keys are pressed together. The – sign means the keys are pressed sequentially. Lshift means the left Shift key.

The * sign inserts a pause with a definable duration. Add more than one pause if necessary. See Appendix B on page 63 for a list of key codes.

3. Press Apply at the bottom of the page. The settings are saved.

DX User IP uses separate mouse synchronization settings - see page 58 - and video- settings - see page 57 - for each port.

Note:

It is still possible to apply OSD key combinations through the Remote Console for switching the KVM port. However, video and mouse synchronization settings will be shared among the ports and may be unintentionally changed for one of those ports.

26