DX USER IP
If an external power option is enabled it is possible to assign a port of this control for power switching to each KVM port, see page 20.
Show in console – check this option to have a button with the port name appear on the top of the Remote console. Click the button to switch to that computer.
Power Control – Click Assign to configure the power option for each port. The following screen appears.
Figure 22 Power option
Select the Serial port to which Power switch is connected.
From the
Appending a socket
Click 
to add the socket to the end of the list (it will be last to be powered on/off).
Inserting a socket
To insert a socket in the list:
1.In the currently included socket list highlight the socket above which you want to insert the new socket.
2.From the
3.Click 
. The new socket is added.
27
