USER GUIDE
∙Server's power state
∙The following actions can be initiated via SNMP:
∙Reset server
∙Power on/off server
∙Reset DX User IP
The following events are reported by DX User IP via SNMP:
∙Login trial at DX User IP failed
∙Login trial at DX User IP succeeded
∙Denying access to a particular action.
∙Server was reset.
∙Server was powered on/off
From the DX User IP Menu choose SNMP settings. The SNMP Settings appear. See Figure 36.
Figure 36 SNMP settings
You can change the following parameters:
Enable SNMP Agent - When checked, DX User IP will answer to SNMP requests. If a community is blank, you cannot perform the request. E.g. if you want to disable the possibility to reset DX User IP via SNMP, don't set a write community.
Read Community - This is the SNMP community, which allows you to retrieve information via SNMP.
46
