JVC GR-DVL822U specifications 50 EN, Dubbing To Or From a VCR

Engage the VCR’s AUX and Record-Pause modes.

50 EN DUBBING

Connector cover*

Power Switch

To AV

To	Audio/Video
	cable (provided)
S-VIDEO

S-Video cable	White to AUDIO L
(provided)	IN or OUT
Yellow to	Red to
VIDEO** IN	AUDIO R IN
or OUT	or OUT

TV

VCR

To S-VIDEO IN or OUT

*When connecting the cables, open this cover.

**Connect when an S-Video cable is not used.

To Use This Camcorder As A Recorder . . .

1.Set the VIDEO/MEMORY Switch to “VIDEO”, then set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

2.Set “S/AV INPUT” to “ON” and set “REC MODE” to “SP” or “LP” ( pg. 48).

3.Connect the cables as shown in the illustration and load a cassette to record on.

4.Press the Recording Start/Stop button to engage the Record-Pause mode. “ AV. IN ” appears on the screen.

5.Press the Recording Start/Stop button to start

recording. rotates.

6.Press the Recording Start/Stop button again to

engage the Record-Pause mode. stops rotating.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

Dubbing To Or From A VCR

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23.

2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder.

5 Press 4/6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in

the Menu Screen ( pg. 48).

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen ( pg. 48).

•Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 48).