JVC GR-DVL822U 68 EN, Rear of the LCD monitor is hot, This is normal Power Switch is set to Auto

68 EN TROUBLESHOOTING (cont.)

SYMPTOM

wThe rear of the LCD monitor is hot.

eThe indicators and the image color on the LCD monitor are not clear.

rThe LCD monitor or viewfinder indications blink.

tColored bright spots appear all over the LCD monitor or the viewfinder.

yDuring recording, sound cannot be heard.

uPlay, Rewind and Fast- Forward functions do not work.

iA memory card cannot be played back.

oThe LCD monitor image is distorted.

pImages on the LCD monitor are jittery.

QThere is no playback picture on the connected TV.

WBlocks of noise appear during playback, or there is no playback picture and the screen becomes blue.

POSSIBLE CAUSES

•The light used to illuminate the LCD monitor causes it to become hot.

•This may occur when the surface or the edge of the LCD monitor is pressed.

•Certain Fade/Wipe effects, certain modes of Program AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time.

•The LCD monitor and the view- finder are made with high-precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor or the viewfinder. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99 %)

•This is normal.

•The Power Switch is set to “ AUTO ”

or “	MANUAL	”.
• The Power Switch is set to “			AUTO	”
or “	MANUAL	”.

•The VIDEO/MEMORY Switch is set to “VIDEO”.

•During playback of the unrecorded portion, High-speed Search and still playback, LCD monitor indications appear distorted. This is not a defect.

•The speaker volume is too great.

•Since the analog input mode is engaged, the camcorder is in the Record-Standby mode.

————

CORRECTIVE ACTION

•Close the LCD monitor to turn it off or set the Power Switch to “OFF”, and let the unit cool down.

————

•Re-read the sections covering Fade/Wipe effects, Program AE

with special effects and “DIS” ( pg. 36 – 39, 45).

————

————

•Set the Power Switch to “PLAY” ( pg. 21).

•Set the Power Switch to “PLAY” ( pg. 28).

•Set the VIDEO/MEMORY Switch to “MEMORY”.

————

•Turn the speaker volume down ( pg. 21).

•Set “S/AV INPUT” to “OFF” in the

Menu Screen ( pg. 48).

•Clean the video heads with an

optional cleaning cassette ( pg. 72).