EN
73
SYMPTOM | POSSIBLE CAUSES | CORRECTIVE ACTION |
26.There are disturbances in audio and video.
26.•If Audio Dubbing or Insert Editing have been performed repeatedly on the same portion of the tape, disturbance to the sound and picture may result.
26.•Use a new, or infrequently used, tape for Audio Dubbing and Insert Editing (☞ pg. 68, 69).
27. During recording, the | 27. •“DISPLAY” is set to “OFF” in | 27. •Set “DISPLAY” to “ON” in |
date/time does not | the Date/Time Menu. | the Date/Time Menu |
appear. | •Interface shooting is | (☞pg. 11). |
| performed. | •During interface shooting, |
|
| the date/time does not |
|
| appear (☞ pg. 23). |
|
| •Press the ON/OFF button |
|
| for longer than 1 second to |
|
| make the indicators appear |
|
| (☞ pg. 22). |
28. The indicators and | 28. •“ON SCREEN” is set to | 28. •Set “ON SCREEN” to “ON” |
messages do not appear | “OFF” in the Date/Time | in the Date/Time Menu |
on screen. | Menu. | (☞ pg. 25). |
|
| •Press the ON/OFF button |
|
| for longer than 1 second to |
|
| make the indicators appear |
|
| (☞ pg. 22). |
29. The indicators do not | 29. •You have made the | 29. •Press the ON/OFF button |
appear on the LCD | indicators disappear. | for longer than 1 second to |
monitor or in the |
| make the indicators appear |
viewfinder. |
| (☞ pg. 22). |
30. Images on the LCD | 30. •In places subject to low | 30. •Adjust the brightness and |
monitor appear dark or | temperature, images become | angle of the LCD monitor |
whitish. | dark due to the characteristics | (☞ pg. 22, 23). |
| of the LCD monitor. When |
|
| this happens, the displayed |
|
| colours differ from those that |
|
| are actually recorded. This is |
|
| not a defect of the camcorder. |
|
| •When the LCD monitor's |
|
| fluorescent light reaches the |
|
| end of its service life, images |
|
| on the LCD monitor become |
|
| dark. Consult your nearest JVC |
|
| dealer. |
|
31. The rear of the LCD | 31. •The light used to illuminate | 31. •Close the LCD monitor to |
monitor is hot. | the LCD monitor causes it to | turn it off or set the Power |
| become hot. | Dial to “OFF”, and let the |
|
| unit cool down (☞ pg. 19). |
32. The indicators and the | 32. •This may occur when the | 32. |
image colour on the LCD | surface or the edge of the | |
monitor are not clear. | LCD monitor is pressed. |
|
33. Images on the LCD | 33. •The speaker volume is too | 33. •Turn the speaker volume |
monitor are jittery. | great. | down (☞ pg. 51). |
34. The LCD monitor and the | 34. | 34. •Wipe them gently with soft |
lens have become dirty | cloth. Wiping strongly can | |
(ex. fingerprints). |
| cause damage. |
|
|
|
CONTINUED ON NEXT PAGE
