Connectvcr Camcorder to TV or, Turn on Power

VCR/TV Connection (when connecting directly to the camcorder)

VIDEO OUT select switch (set to CVBS)

	MIC	To AV OUT
		To AV OUT
	DC-IN
		To VIDEO/AUDIO IN
Open the		connectors	To TV or VCR
jack cover.		VIDEO/AUDIO cable (provided)
		VIDEO/AUDIO cable (provided)
		(ø3.5, camcorder to TV or VCR)	VCR
		Cable adapter (provided)
		If your VCR has the 21 pin AV input connector (SCART),
		use the provided cable adapter.

Pull out the jack cover and open it. Connect as shown in the illustration.

If Using A VCR . . . go to step 2.

If not . . . go to step 3.

2 CONNECTINPUT VCR OUTPUT TO TV Refer to your VCR’s instruction manual.

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 52).

• Playback Sound Mode Display

.... Press the MENU button, and set “ON

SCREEN” in the Date/Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●Turn on the TV/VCR after connection is com- pleted. Otherwise damage to this unit and other equipment may result.

●Input mode setting varies depending on the type of TV used. Refer to your TV’s instruction manual.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder's display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack. (☞ pg. 10)

●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT jack.