TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording.
CLOCK ADJ.
Allows you to set the current date and time ( pg. 10).
For Playback Menu
The following procedure applies to all except Synchro Comp ( pg. 32).
1 Set the Power Switch 8 to “ 
” while pressing down the Lock Button 0 located on the switch.
2 Press MENU 2. The Menu Screen appears.
3 Press + or – 3 to select the desired function menu, and press SELECT/SET 1.
4 Press + or – 3 to select the desired function, and press SELECT/SET 1 to display the Sub Menu.
5 Press + or – 3 to select the desired parameter and press SELECT/SET 1. Selection is complete.
6 Press + or – 3 to select “ 
RETURN” and press SELECT/SET 1 twice to close the Menu Screen.
EN
VIDEO
V I DEO
SOUND MODE | – | STEREO | |
12b i t MODE | – | SOUND 1 | |
SYNCHRO | – |
| O . O |
| |||
REC MODE | – |
|
|
|
|
| S / AV I NPUT – OF F | |
|
|
| RETURN | |
|
|
| ........ pg. 25, “Playback Sound”. | |
SOUND MODE |
| |||
|
|
| ........ pg. 25, “Playback Sound”. | |
12bit MODE |
| |||
|
|
|
| ........ pg. 32, “For More |
SYNCHRO | ||||
|
|
|
| Accurate Editing”. |
|
|
|
| |
REC MODE |
|
| ||
Allows you to set the tape recording mode ([SP] or LP) depending on your preference ( pg. 10).
It is recommended you use “REC MODE” in the
“
VIDEO” Menu when using this camcorder as a recorder during dubbing ( pg. 26, 27).
•“REC MODE” can be set when the Power Switch 8 is
set to “ 
” or “ 
” ( pg. 10, 21).
S/AV INPUT
A/V IN: Enables audio/video signal input from the S/AV connector ( pg. 26).
S IN: Enables
[OFF]: Enables audio/video signal output to a TV, VCR, etc. via the S/AV connector ( pg. 15, 26).
•When “S/AV INPUT” is set to “A/V IN” or “S IN”, camcorder playback cannot be viewed on the AV output.
SYSTEM
SYSTEM
BEEP | – | MELODY |
TALLY | – | ON |
REMOTE | – | ON |
DEMO MODE | – | ON |
PR I OR I TY | – | LCD |
CAM RESET |
|
|
RETURN
Each setting is linked with “ 
SYSTEM”, which appears when the Power Switch 8 is set to “ 
” ( pg. 23).
The parameters are the same as in the description on pg. 23.
[ ] =
24 USING MENUS FOR DETAILED ADJUSTMENT
