Connections
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time
..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 23, 25).
Or, press DISPLAY Q on the remote control to turn on/off the date indication.
To S/AV #
To
Not connected
Connector cover*
Yellow to VIDEO IN***
Red to AUDIO R IN**
White to AUDIO L IN**
• Time Code
..... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 24, 25).
• Indications other than date/time and time code
..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in
the Menu Screen ( pg. 23, 25).
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).
●To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder’s Power Switch 8 to “ ” or “ 
”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●If no image is displayed or no sound is heard from the TV,
set “S/AV INPUT” to “OFF” in the Menu Screen ( pg. 24).
●While the
To TV or VCR
TV
VCR
*When connecting the cables, open this cover.
**The audio connection is not required for watching still images only.
***Connect when the
EN
