To choose whether or not the following displays | Buttons And Functions |
appear on the connected TV |
|
|
● Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 27, 31) Or, press DISPLAY on the remote control to turn on/off the date indication.
● Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 27, 31) ● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 27, 31)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 11)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
Playback Using The Remote ControlThe
A Infrared beam transmitting window
●Transmits the beam signal.
The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
C SLOW Rewind Button ( pg. 20)
D REW Button
●Rewind/Reverse Shuttle Search on a tape ( pg. 18)
●Displays previous file in a memory card ( pg. 22)
F SHIFT Button ( pg. 20, 41)
G DISPLAY Button ( pg. 19, 37, 42)
H SLOW Forward Button ( pg. 20)
I PLAY Button
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by pushing the lock tab.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
2
1
13
Lock tab
Beam Effective Area (indoor use) |
|
When using the remote control, |
|
be sure to point it at the remote |
|
sensor. The transmitted beam’s |
|
approximate effective distance for |
|
indoor use is 5 m (16 ft). |
|
NOTE: | Remote sensor |
The transmitted beam may not be effective or may cause incorrect
operation when the remote sensor is directly exposed to sunlight or powerful lighting.
N EFFECT ON/OFF Button ( pg. 20)
The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.
a Zoom (T/W) Buttons Zoom in/out ( pg. 16, 20)
(Also available with the Power Switch set to “PLAY”) b START/STOP Button
Functions the same as the Recording Start/Stop Button on the camcorder.
c S.SHOT Button
Functions the same as SNAPSHOT on the camcorder. (Also available with the Power Switch set to “PLAY”)