GETTING STARTED EN 13

Grip Adjustment

1 Adjust the velcro strip.

2 Pass your right hand through the loop and grasp the grip.

3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button and Power Zoom Lever. Be sure to fasten the velcro strip to your preference.

Viewfinder Adjustment

1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.

3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.

PAUSE

Diopter Adjustment Control

Brightness Adjustment Of The Display

1 Set the Power Switch to “M” or “PLAY” while pressing down

the Lock Button located on the

MENU

 

switch.

(Up)

2 Open the LCD monitor fully.

SET

( pg. 15)

●To adjust the brightness of the

viewfinder, pull out the

(Left)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

viewfinder fully and set

 

 

 

SET

 

 

 

 

 

 

 

“PRIORITY” to “FINDER”

 

 

 

 

 

 

 

 

 

 

 

STARTED

( pg. 27, 29).

 

 

 

 

 

 

 

 

 

 

 

3 Press MENU. The Menu

 

 

 

 

 

(Right)

(Down)

 

 

 

 

 

 

Screen appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Press or to select

 

 

 

 

 

 

 

 

 

 

 

GETTING

 

 

 

 

 

 

 

 

 

 

 

CAMERA DISPLAY Menu

 

 

 

 

 

 

 

 

 

 

 

“n”, and press SET. The

BRIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appears.

 

 

 

 

 

 

 

 

 

 

 

 

5 Press or to select “BRIGHT”, and press SET. The Menu Screen closes and the brightness control indicator appears.

6 Press or until the appropriate brightness is reached.

7 Press SET.

Tripod Mounting

To attach the camcorder to a tripod, align screw to the mounting socket on the camcorder. Then tighten the screw clockwise.

CAUTION:

When retracting the viewfinder, take care not to pinch your fingers.