Set the VIDEO/MEMORY Switch to “VIDEO”.
42 EN EDITINGMake Connections

Also refer to page 18.

1 A A JVC VCR equipped with a Remote PAUSE connector

Connect the editing cable to the Remote PAUSE connector.

B A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A.EDIT connector Connect the editing cable to the R.A.EDIT connector.

C A VCR other than above

Connect the editing cable to the remote control’s PAUSE IN connector.

2 Insert a recorded tape into the camcorder.

3

4 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5 Turn the VCR power on, insert a recordable tape and engage the AUX mode.

●Refer to the VCR’s instructions.

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 27, 31) Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 27, 31)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 27, 31)

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of the S/AV/Editing cable. However, it is necessary to connect the editing cable of the S/AV/Editing cable to the VCR. (For details, see step 1.)

Open the cover.

To AV

 

mark

S/AV/Editing cable

 

(provided)

 

1

2

3

4

Editing extension cable

 

 

 

(optional)**

 

 

 

AB To Remote PAUSE or

 

 

 

R.A.EDIT

 

 

 

 

 

VCR

 

C To PAUSE IN

 

 

 

TV

A Black to S-VIDEO IN*

B Yellow to VIDEO IN

C Red to AUDIO R IN

D White to AUDIO L IN

*Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

**If necessary, use this cable provided with the remote control kit RM-V717KITU for connections.