36 EN FEATURES FOR RECORDING

To make thumbnail images after video recording manually

1 Set “NAVIGATION” to “MANUAL”. ( pg. 27, 28) 2 Set the Power Switch to “A” or “M”.

3 After the recording, press NAVI STORE.

●The “ ” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.

NOTE:

The remaining number of storable thumbnail images also appears on the screen when it reaches 10 or less. If “REC

SELECT” is set to “ /” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.

To find scenes on tape using thumbnail images (Navigation Search)

1 Set the Power Switch to “PLAY”.

2 Press NAVI during video playback or stop mode.

● The loaded cassette’s Navigation

 

NAV I GAT I ON

thumbnail image screen appears.

 

DATE : MAY 2 4 ’ 0 4

3 :: 2 9AM

3 Press / / /

to select

TC

: 1 3 : 2 3 : 1 5

 

1

2

3

the desired image, and press SET.

4

5

006

● The “NAVIGATION SEARCH”

 

 

 

indication appears blinking and the

 

 

 

camcorder starts searching the

 

 

 

tape for the relevant point of the selected thumbnail image.

To cancel Navigation search midway

Press 4/9, 3, 5 or 8.

To add thumbnail images during video playback

1 Set the Power Switch to “PLAY”.

2 Press 4/9 to start video playback.

3 Press NAVI STORE at the desired point.

●The “ ” indicator appears briefly and the image of the point where NAVI STORE is pressed is stored in the memory card as a thumbnail image.

6 Press SET. The NAVIGATION

NAV I GAT I ON

screen appears.

 

DELETE CURRENT?

7 Press

or

to select

 

“EXECUTE”, and press SET.

DEC 2 6 ’ 0 4 3 : 0 0PM

● Press

to display the previous

EXECUTE

RETURN

image. Press

to display the next

 

image.

●To cancel deletion, select “RETURN”.

●Thumbnail images cannot be deleted during video playback.

CAUTION:

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it.

NOTES:

●Be sure to always use the same tape and memory card together as they were during recording; otherwise, the camcorder cannot recognize Tape and Memory Card IDs to perform Navigation Function properly.

●Check if an appropriate tape and memory card are loaded when the following messages appear: “UNABLE TO USE NAVIGATION”, “THIS MEMORY CARD IS NOT COMPATIBLE”.

●If you change the memory card while shooting on one tape, two memory cards will share the tape’s thumbnail images. We recommend that you use one memory card for one tape.

●Navigation Search does not work if the current position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, Navigation Function does not work properly.

●Before shooting newly over a recorded tape, be sure to delete all thumbnail images of the previous recording from the relevant memory card.

●If you copy thumbnail images from one memory card to another via a PC, Navigation Search does not work with the copied memory card.

To delete thumbnail images

1 Set the Power Switch to “PLAY”.

2 Press MENU. The Menu Screen appears.

3 Press SET to select “t”. The VIDEO Menu appears.

4 Press

or

to select

 

 

 

 

 

 

 

 

 

 

V I DEO

 

 

 

 

 

“NAVI.DEL.”, and press SET. The

SOUND MODE–

STEREO

 

 

 

NARRAT I ON

–

OFF

Sub Menu appears.

SYNCHRO

–

±0 . 0

 

 

REC MODE

–

 

 

 

 

 

5 By pressing

or :

 

 

COPY– OFF

BLANK SRCH

 

 

 

 

 

 

 

 

 

NAV I . DEL .

 

 

 

 

 

 

Select “IMAGE SEL.” to delete the

S / AV I NPUT – OFF

RETURN

currently displayed thumbnail

 

image.

 

Select “TAPE SEL.” to delete all thumbnail images for the tape which contains the currently displayed image.

Select “ALL” to delete all thumbnail images stored in the memory card at once.