White paper
EN35
Manual White Balance Operation
If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.
1 SELECT OPERATION MODE Follow steps 1 through 4 of the white balance adjustment (☞ pg. 34), and select “MWB”.
2 SET MANUAL WHITE BALANCE Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.
3 ENTER SETTING
Press the Select Dial until “MWB” begins blinking.
•When the setting is completed, “MWB” stops blinking, and the Menu Screen reappears with the highlight bar on “RETURN”.
4 CLOSE MENU SCREEN
Select Dial
Display
4NEXT
M. W. B. AUTO
D . ZOOM ON TELE MACRO OFF DATE
TIME TAPE LENGTH T45
4RETURN
M.W.B.
AUTO
: FINE
: CLOUD
: HALOGEN
MWB
Power Switch
Menu Screen
M.W.B. Menu
Press the Select Dial again to close the Menu Screen.
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour, changing the tint. Red paper — deeper green; blue paper — orange; yellow paper — deeper purple.
NOTES:
● In step 2, it may be difficult to focus on the white paper |
in some circumstances. In such a case, adjust focus |
manually (☞ pg. 33). |
● A subject can be shot under various types of lighting |
conditions indoors (natural, flourescent, candlelight, |
etc.). Because the colour temperature is different |
depending on the light source, the tint of the subject will |
differ depending on the white balance settings. Use this |
function for a more natural result. |
● Once you adjust white balance during Manual White |
EXIT
Balance operation, the setting is retained even if the |
power is turned off or the battery removed. |
