JVC GR-FXM75 manual 58 EN, Using the Remote Control Unit, SET REMOTE/VCR Code, Operate VCR

58EN

USINGTHEREMOTECONTROLUNIT(cont.)

Random Assemble Editing [R.A.Edit]

	Create edited videos easily using your camcorder as
VCR (Recording deck)	the source player. You can select up to 8 “cuts” for
	automatic editing, in any order you like. R.A.Edit is
	more easily performed when the RM-V709U MBR
	(Multi-Brand Remote, ☞ pg. 56) is set to operate
	with your brand of VCR (see VCR CODE LIST), but
	can also be performed by operating the VCR
	manually.
	Before operation, make sure the lithium battery is
	installed in the remote control RM-V709U
	(☞ pg. 56).

MBR SET

1 2 3

VCR CTL

4 5 6

7 8 9 0

RM-V709U (provided)

VCR CODE LIST

SET REMOTE/VCR CODE

1 SET REMOTE TO OPERATE VCR Turn off the power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button (A) and then (B).

•The code is automatically set once you release MBR SET, and the VCR’s power comes on.

2 OPERATE VCR

Make sure the VCR’s power is on. Then, while holding VCR CTL, press the button on the

VCR BRAND	BUTTONS
NAME	(A) (B)
AKAI	6 2￿
	6 4￿
	7 7
BLAUPUNKT	1 3
FERGUSON	9 7￿
	9 8￿
	3 2
GRUNDIG	1 4￿
	3 4
HITACHI	6 6￿
	6 3
JVC A	9 1￿
B	9 6￿
C	9 3
MITSUBISHI	6 7￿
	6 8
NEC	3 7￿
	3 8
PANASONIC	1 3￿
	1 7￿
	1 1￿
	9 4￿
	1 8

VCR BRAND	BUTTONS
NAME	(A) (B)
PHILIPS	1 9￿
	9 5￿
	1 1￿
	9 4￿
	9 1￿
	9 6￿
	1 2￿
	3 3￿
	7 2￿
SANYO	3	￿ 6￿
	3	￿ 5
SELECO,	9 1￿
REX	9 6
SHARP	1 5￿
	1 `
SONY	6 5￿
	6 `￿
	3 9￿
	3 1￿
THOMSON,	9 ￿ 1￿
TELEFUNKEN,	9 6￿
SABA,	9 7￿
NORDMENDE	3 2
TOSHIBA	6 9￿
	6 1

remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you do not need to press VCR CTL for this one).

You are now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

NOTES:

●If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.

●Some brands of VCR do not come on automati- cally. In this case, turn the power on manually and try step 2.

●If the remote control is not able to control the VCR, use the controls on the VCR.

●When the remote control’s battery runs out, the VCR brand you have set will be erased.

In that case, replace the old battery with a new one and reset the VCR brand.