JVC EN37, Playback Zoom, may suffer, To End Zoom, during playback, the previously set level, 1 Press PLAY to find the scene of interest

EN37

Remote sensor	Playback Zoom
	To magnify the recorded image up to 10X at any time
	during playback.

NOTES:

●Use the remote control unit to perform this procedure.

		● Make sure that the TBC mode is activated ( pg. 31).
		1 Press PLAY to find the scene of interest.
		Press the Zoom Buttons (T/W) on the remote control.
		2 Make sure the remote control is pointed at the
		camcorder’s remote sensor. Pressing T zooms in.
		To End Zoom . . .
		.... press and hold W until magnification returns to
Zoom Buttons		normal. Or, press STOP and then press PLAY.
	PLAY	NOTES:
		● Zoom can also be used during still playback.
STOP		● Due to digital image processing, the quality of the image
		may suffer.
		● After zooming in on a still video image, when normal
		playback is started, the zoomed-in effect is momentarily
		cancelled but then resumes, returning magnification to
		the previously set level.