EN5
How To Attach The Core Filter
Attach the provided Core Filter to the provided A/V Cable,
1 2
5 cm
Stopper
3
1 Release the stoppers on both ends of the Core Filter.
2 Run the cable through the Core Filter, leaving approx. 5 cm of cable between the cable plug and the Core Filter. Wind the cable around the outside of the Core Filter as shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
3 Close the Core Filter until it clicks shut. Connect the end of the cable with the Core Filter to the camcorder.
With the provided AC Adapter, attach Core Filters to both ends of the cable as shown below.
5 cm | 5 cm | |
|
|
|
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
123