JVC EN41, VCR, NOTE:, MAKE CONNECTIONS, Power Switch to “ ”, VCR OTHER THAN TYPE OR, CONTINUED ON NEXT PAGE, 1JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

To S-Video Output connector

S-Video cable (provided)

VCR

TV

To J terminal

Open (JLIP) the cover.

To Video Output and Audio Output connectors

A/V cable (provided)

Editing cable (ø3.5 mini- plug cable) (provided)

To Audio, Video and S-Video Input connectors

To Remote

PAUSE

To PAUSE-IN

EN41

MAKE CONNECTIONS

1 JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

VCR OTHER THAN TYPE OR

Connect the editing cable to the remote control’s PAUSE-IN connector.

2 Insert a recorded tape into the camcorder and set the

Power Switch to “ ”.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instruc- tions).

NOTE:

(For GR-SXM86ED/SXM85ED/SXM76ED/SX56ED Owners)

If your VCR has an S-Video input connector, connect the camcorder and the VCR using the provided S-Video cable. This can improve the dubbed picture quality.

CONTINUED ON NEXT PAGE.