16
MENU SETTINGS
This function is cancelled when the power is
turned off or when the cassette is ejected.
To use this function, it is recommended that
SCROLL in TITLE SETUP (pg. 14) be set to
“OFF”.
ON: With an S-VHS cassette, “S”
=
appears
and the camcorder records in S-VHS.
With a VHS cassette, “S-ET”
=
appears and the
camcorder records with S-VHS picture quality,
which is called Super VHS ET (Expansion
Technology). “S-VHS REC”
2
appears during
recording.
OFF: Records in VHS on a VHS or S-VHS
cassette.
• JVC EHG (Extra High Grade) tapes are
recommended for superior results.
Use S-VHS tape for storing recordings for an
extended period or for recording important
scenes, as it enables higher-quality recording
and playback.
With some tapes, better picture quality may not
be obtained even with S-VHS ET recording. It
is recommended that you do test record
beforehand to make sure whether better
results can be obtained.
It is recommended that tapes recorded on this
camcorder be played back on this camcorder.
Tapes recorded in S-VHS or S-VHS ET mode
can be played back not only on this camcorder
but also on a Super VHS VCR.
—Tapes recorded in S-VHS ET mode cannot
be played back on some VCRs, including
some JVC VCRs.
Tapes recorded in S-VHS or S-VHS ET mode
cannot be played back correctly on a normal
VHS VCR.
S-VHS ET does not work with S-VHS tapes.
To avoid on-screen noise, do not perform Still
Playback or Shuttle Search repeatedly.
If the picture contains a lot of jitter or noise, use
a cleaning cassette.
VCR MENU
Makes it easier to locate a specific tape segment.
1) Set the Power Switch
$
to “PLAY” while
pressing down the Lock Button
#
.
2) Press the MENU Wheel
1
in. The VCR MENU
screen appears.
3) Rotate the MENU Wheel
1
to select
“COUNTER MEMORY” and press it. Then,
rotate the MENU Wheel
1
to “ON” and press
it. (“M” appears when you return to normal
screen.)
4) Rotate the MENU wheel to select “COUNTER
RESET” and press it. Then, rotate the MENU
Wheel
1
to “YES” and press it. The counter
resets to “0:00:00”.
5) To return to normal screen, rotate the MENU
Wheel
1
to “3EXIT” and press it.
6) After recording or playback, press 7
)
, then
1
~
with Power Switch
$
is set to "PLAY".
The tape automatically stops at or close to
0:00:00.
7) Press 3/8
(
to start playback.
The counter memory functions in both Fast-
Forward and Rewind modes.
S-VHS (S-VHS ET)
COUNTER MEMORY
2EXIT
VC
COUNTER RESET
RME
O
Y
N
F
ES
U
F
COUNTER MEMORY
GR-SXM301AS-EN.fm Page 16 Thursday, December 2, 2004 5:53 PM