JVC GR-SXM38U BASIC FEATURES

11
BASIC FEATURES
• Manual Tracking may not work with tapes
recorded on other VCRs or camcorders.
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC
4
during playback for more than 1 second. “TBC” 5
is displayed.
• The “TBC” indicator 5 turns green (grey with a
camcorder equipped with a black/white
viewfinder) while TBC is working, and white
while TBC is not operative.
• TBC does not work during Still Playback and
Shuttle Search ( pg. 9).
• It may take a few seconds before TBC actually
starts working.
• The picture may be distorted if the TBC mode
is activated or deactivated at the edit-in/-out
points or when normal playback resumes after
Still Playback or Shuttle Search ( pg. 9).
• If the playback picture is distorted when TBC is
set to on, turn off TBC.
1) Make sure all units are turned off.
2) Connect the camcorder to a TV or VCR. If
using both TV and VCR, connect the VCR
output to the TV input.
3) Turn on all units. Set the VCR to its AUX input
mode, and set the TV to its VIDEO mode.
• Use the AC Adapter as the power supply.
• The S-Video cable connection can improve the
dubbed picture quality. The S-Video cable is
optional. Be sure to use the following cable:
YTU94146A S-Video cable.
Consult the JVC Service Center described on
the sheet included in the package for details on
its availability. Make sure to connect the end
with a core filter to the camcorder. The core
filter reduces interference.
• Be sure to lower the TV volume to its minimum
to avoid a sudden burst of sound when the
camcorder is turned on.
• If you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur in
the camcorder playback picture.
1) Connect the camcorder and the VCR ( pg.
11, “Connections To A TV/VCR”). Set the
Power Switch
$ to “PLAY” while pressing
down the Lock Button # , turn on the VCR’s
power, and insert the appropriate cassettes in
the camcorder and the VCR.
•Engage the VCR’s AUX and Record-Pause
modes.
2) Press 3/8 ( to find a spot just before the edit-
in point. Once it is reached, press 3/8 (
again.
TBC (Time Base Corrector)
Connections To A TV/VCR
Tape Dubbing
T
V
V
C
R
To S-Video
Output
66
66
White to Audio
Output
77
77
Yellow to Video
Output
88
88
S-Video
cable
(Optional)
A/V cable
(Optional)
To S-Video
Input
White to
Audio Input
Yellow to
Video Input
Connector
Cover
GR-SXM38-EN.fm Page 11 Friday, December 23, 2005 11:43 AM