JVC GR-SXM745, GR-SXM540 manual Using The Cassette Adapter, Connection To a Personal Computer

Using The Cassette Adapter

Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/

VHS VCR.

1)Slide the battery cover up to remove it, install one “AA (R6)” size battery, then reattach the cover.

2)Slide the latch to open the compartment door, then insert the cassette and close the compartment door.

3)Load the cassette adapter into the VCR and play the tape back.

4)Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then, insert your finger in the hole, and push up and

remove the cassette.

•During tape loading and unloading, do not touch the reels for safety and tape protection.

•Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. Playback is possible with a VCR equipped with the S-VHS or SQPB (S-VHS QUASI PLAYBACK) function.

•During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

•To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Connection To A Personal Computer

You can transfer image data from the camcorder to a PC using Digital Photo Navigator. When connecting to your PC, refer to the instruction manuals of the PC and Setup Guide for the provided software.

When connecting to a Macintosh . . .

The optional KEYSPAN USA-19 USB PDA Adapter is required.

•Macintosh is a registered trademark of Apple Computer, Inc.

•Keyspan is a trademark of InnoSys Inc.

Sliding Latch

Compartment Door

Recording

Safety Hole

Hole

Reels

Battery Cover

16