Canon MP 1000 manual Using Directory Dialing

Using Directory Dialing

To dial any fax or telephone number that is registered for one- touch or coded speed dialing, you can use directory dialing. Directory dialing is similar to using a telephone book because it allows you to look up a number by the name under which it is registered.

You must make entries for directory dialing within 60 seconds after starting or the MultiPASS 1000 returns to standby mode.

1. When you reach a step asking you to dial, press the CODED DIAL/DIRECTORY button in the middle of the operation panel two times.

SEARCH TEL DIRECTORY

❏Be sure to press the CODED DIAL/DIRECTORY button twice.

2. Press the numeric button with the letter corresponding to the first letter of the name you want to recall. The display shows the first name in the fax or telephone name list that begins with that letter.

❏ If the name begins with a number or symbol, first press the # button to view the names.

❏If no names are listed under the letter you choose, the display shows a message similar to this:

[ T U V ]

NOT FOUND!

<	>	3. Press the arrow buttons until the name whose number you
		want to dial appears on the display.

❏To search the list in alphabetical order, press <.

❏To search the list in reverse alphabetical order, press >.

4. When the name you want to send to or call appears, press

START/COPY.

Using Automatic Dialing

Chapter 6 Using Automatic Dialing 6-17