Canon MP 1000 manual Changing a Group Dialing Number

After scanning the document into memory, the MultiPASS 1000 automatically dials each number in the group. It dials the numbers in the order that you registered them.

❏If there is no group registered under the one-touch speed dialing button or two-digit code, the LCD displays the NO TEL # message. Make sure you entered the correct number and that the group whose numbers you want to dial has been registered correctly for group dialing.

❏If you make a mistake when dialing, press STOP. Then try again.

Changing a Group Dialing Number

Use these steps when you need to make group dialing changes to:

❏Add or delete numbers in a group

❏Change the name of the group

❏Cancel group dialing for a specific one-touch button or coded dial code

1.Follow the same steps that you would use to register the group dialing numbers and names.

❏ See steps 1-5 starting on page 6-10.

<	>	2. Press the arrow buttons to display the one-touch or coded
		speed dialing number that contains the group you want to
		change.

GROUP DIAL

F08=GROUP DIAL

3. Press START/COPY.

TEL= 2226663000

F16 JONES & ASSOC.

❏The MultiPASS 1000 displays the first speed dialing number in the group.

4.If you want to add one-touch or coded speed dialing numbers to the group, enter them now.

❏Follow the instructions starting with step 8 on page 6-11.

Using Automatic Dialing

Chapter 6 Using Automatic Dialing 6-13