10-4 Special Sending Procedures Chapter 10
5. Use the numeric keypad to enter the time you want to send the
document.
Set the time using the 24-hour system. If the hour or
minute is a single digit, precede it with a zero. For
example:
07:30 = 7:30 a.m.
17:05 = 5:05 p.m.
If you make an error entering the time, press CLEAR. Then
enter the correct time.
6. PressSTART/COPY.
7. Enter the fax number(s).
You can use any dialing method: regular dialing,
one-touch speed dialing, or coded speed dialing.
You can send to up to 97 destinations. See Sending to More
Than One Locationon page 10-1 for details.
NYou can enter only one number directly from the keypad using
regular dialing. Remember to press START/COPYafter entering the
number.
If the last number you enter is regular dialing, you must press
START/COPYtwice.
8. Press START/COPY.
The MultiPASS 1000 scans the pages into memory. See
Sending Large Documentson page 5-10 for details.
The MultiPASS 1000 sends the document at the preset time. See
Transmitting the Documenton page 5-11 for details.
To cancel the preset sending operation, see Canceling Preset Sending
on page 10-5. To change the settings for preset sending, first cancel
the preset sending operation; then repeat this procedure from the
beginning.
After the MultiPASS 1000 sends the document, the preset time
clears. The preset time also clears if you unplug the unit or if there
is a power failure.
TEL=