Canon MP 1000 manual Document Ready Relay

7. Use the numeric keypad to enter the group number.

❏ If the group number is a single digit, precede it with 0.

❏ If you make an error entering the group number, press CLEAR and then enter the number correctly.

8. Press START/COPY.

DOCUMENT READY

RELAY 08

9. To use memory sending or to send to more than one relay fax, press FUNCTION. Otherwise, go to step 11.

SELECT MENU

NIf you are sending to more than one relay fax, you must use memory sending.

10.Press MEMORY TRANSMISSION.

DOCUMENT READY

RELAY 08 MEMORY

11.Enter the fax number(s).

❏If you are using direct sending, you can send to one relay fax only.

❏If you are using memory sending, you can send to up to 97 relay fax machines. See Sending to More Than One Location on page 10-1 for details.

12. Press START/COPY.

❏ If you are using memory sending, the MultiPASS 1000 scans up to 50 letter-size pages (based on CCITT #1 Chart) into memory. See Sending Large Documents on page 5-10 for details.

The MultiPASS 1000 sends the document to the relay fax(es). See Transmitting the Document on page 5-11 for details.

Special Sending Procedures

Chapter 10 Special Sending Procedures 10-7