Canon MP 1000 Sending Procedures, Sending Large Documents, Customizing the Transmission Mode

Sending Procedures

You can use the features described in this section with other sending features.

Sending Large Documents

The MultiPASS 1000 scans up to 50 letter-size pages into its memory (based on CCITT #1 Chart).

❏If you have more than 50 pages to send, divide the document and send each 50-page or less section separately.

❏You can send up to 50 letter-size pages (based on CCITT #1 Chart) at one time with memory sending.

•If memory becomes full while scanning your document and you are sending to one location, the MultiPASS 1000 stops scanning in the document. It sends the pages in memory and then switches to direct sending to send the rest of the document.

•If memory becomes full while scanning your document and you are sending to multiple locations, the LCD displays MEMORY FULL and the MultiPASS 1000 erases the document from memory. If this happens, start the procedure from the beginning.

❏The Automatic Document Feeder (ADF) holds 30 sheets of paper, but you can add pages to the stack as the MultiPASS 1000 feeds the paper. See page 4-5 for details.

Customizing the Transmission Mode

When you register a fax number for one-touch speed dialing or coded speed dialing, you will see this LCD display after you enter the fax number and name:

NEED TO SET TX MODE?

YES < > NO

This allows you to select the initial transmission speed, the long distance setting, and whether you want to send the document confidentially or to a Canon relay fax machine. Regular sending is the default.

This starting speed is the speed at which the MultiPASS 1000 first tries to send a document over the telephone line. There are two starting speeds, 9600 bps and 4800 bps. The higher the speed, the faster the documents are sent.

5-10Sending Fax Documents Chapter 5