Canon MP 1000 manual Density Control, 14Sending Fax Documents

Density Control

Each time you feed a document into the MultiPASS 1000, the default density setting of 4 is displayed. You can change this setting if you normally send documents that require a lighter or darker setting. The new setting remains in effect until you change it.

The density control box looks like this:

There are seven settings, from 1 to 7. The smaller the number, the darker the image. The normal setting is 4; 1 is the darkest and 7 is the lightest.

1. Press FUNCTION.

SELECT MENU

2. Press 2.

SELECT MENU 2.USER SETTINGS

3. Press START/COPY.

USER SETTINGS

1.SET TIME

< > 4. Press the arrow buttons until the following display appears:

USER SETTINGS 6.DENSITY CONTROL

5-14Sending Fax Documents Chapter 5