Canon MP 1000 manual Miscellaneous Printer Operations, Changing Printer Settings

Chapter 12 Miscellaneous Printer Operations

This chapter describes miscellaneous printer operations you can perform with your MultiPASS 1000. It includes:

❏Changing printer settings

Changing Printer Settings

You can customize the built-in bubble jet printer settings by changing the following selections in the PRINTER SETTINGS menu:

❏SELECT PAPER SIZE

Changes the paper size that the MultiPASS 1000 uses: letter, (8.5 x 11”) legal (8.5 x 14”) or A4 (8.25 x 11.7”).

LTR A4 LEGAL

❏RX REDUCTION

Selects a reduction mode for incoming documents. When reduction mode is turned on, you can select a reduction size of 75%, 85%, 90%, or 95%. Also, you can specify whether the reduction is to be vertical only or both vertical and horizontal. When set to ON, all documents are reduced.

ON OFF

❏INK DETECTOR

Turns the ink detector on or off; the ink detector prints a small square box on the bottom right of incoming documents to help you estimate the amount of ink remaining. Turning this feature on allows the MultiPASS 1000 to check automatically if there is enough ink in the cartridge.

ON OFF

NWhen set to OFF, the MultiPASS 1000 cannot detect when an ink cartridge runs out of ink. Instead of displaying the CHANGE CARTRIDGE message and storing the document in memory, the MultiPASS 1000 continues to print (even blank pages).

Miscellaneous Printer Operations

Chapter 12 Miscellaneous Printer Operations 12-1