Canon MP 1000 manual Switch Action

❏F/T SWITCH ACTION

If you set this option to RECEIVE and you do not pick up the handset when another party tries to call you, the MultiPASS 1000 switches to automatic receiving. This feature keeps you from missing incoming documents if your MultiPASS 1000 is unable to detect a fax signal when the other party tries to send a document.

Because it is expecting a document, automatic receiving keeps your MultiPASS 1000 busy for about 35 seconds after a call comes in. If you want your telephone to be free immediately after receiving a phone call, you can turn off automatic switching by setting the F/T SWITCH ACTION to DISCONNECT.

You select these options from the RX SETTINGS menu when

FAX/TEL SWITCH is ON.

1. Press FUNCTION.

SELECT MENU

2. Press 5.

SELECT MENU 5.RX SETTINGS

3. Press START/COPY.

RX SETTINGS 1. ECM RX

< > 4. Press the arrow buttons until the following display appears.

RX SETTINGS 2.FAX/TEL SWITCH

5. Press START/COPY.

FAX/TEL SWITCH

ON

6. Press START/COPY.

FAX/TEL SWITCH 1.RING START TIME

Receiving Fax Documents

Chapter 7 Receiving Fax Documents 7-21