Canon MP 1000 manual Using one-touch or coded confidential sending

Using one-touch or coded confidential sending

1.Make sure the receiving party has a Canon fax with confidential receiving capability.

2.Find out the confidential mailbox number of the receiving party.

3.Make sure the fax number is registered for confidential sending.

4.Place the document into the Automatic Document Feeder (ADF).

5.To use memory sending or to send to more than one destination, press FUNCTION and then press MEMORY TRANSMISSION. Otherwise, skip this step.

DOCUMENT READY

MEMORY

6.Press the one-touch speed dialing button or press CODED DIAL/DIRECTORY and the two-digit code that you registered for confidential sending.

❏If you are using direct sending, you can only send to one location.

❏If you are using memory sending, you can send to up to 97 locations. See page 10-1 for details.

•First make sure that each speed dialing number is registered for confidential sending.

•You can also use one-touch or coded speed dialing buttons registered for group dialing as long as each number in the group is registered for confidential sending.

If you are using memory sending, the MultiPASS 1000 scans the document into memory. See page 5-6 for details.

The MultiPASS 1000 sends the document. See Transmitting the Document on page 5-11 for details.

Special Sending Procedures

Chapter 10 Special Sending Procedures 10-15