Canon MP 1000 manual 10-20Special Sending Procedures

3.Use the numeric keypad to enter the time that you want to poll the other fax.

❏Set the time using the 24-hour system. If the hour or minute is a single digit, precede it with a zero. For example:

07:30 = 7:30 a.m. 17:05 = 5:05 p.m.

❏If you make an error entering the time, press CLEAR. Then enter the correct time.

4.Press START/COPY.

TEL=

5.Dial the fax number(s) you want to poll.

❏You can poll up to 97 destinations. See page 10-1 for details.

6.Press START/COPY.

POLLING
TX/RX NO.	XXXX

The LCD displays:

06/21/95 17:10

TIMER

Your MultiPASS 1000 begins receiving the document at the preset time.

❏The MultiPASS 1000 beeps once when the document is received without errors.

❏The MultiPASS 1000 automatically redials if the other fax does not answer or if the line is busy. (You can specify the number of times it redials; see Auto Redial on page 5-17.)

❏If an error occurs during reception, the MultiPASS 1000 beeps intermittently for a few seconds. If this happens, try polling again.

❏To stop polling while receiving, press STOP.

❏If the ALARM light is flashing, clear the error and press STOP. If necessary, refer to Chapter 14, Troubleshooting.

10-20Special Sending Procedures Chapter 10