Canon MP 1000 manual You must set the transmission mode, so press to choose YES

7. Press START/COPY.

NEED TO SET TX MODE?

YES < > NO

< > 8. You must set the transmission mode, so press < to choose YES.

❏If you do not have any problems sending faxes to the relay location, press START/COPY twice and go to the next step.

❏If you have problems faxing to the relay location, see page 5-10 for details on Customizing the Transmission Mode before you proceed.

			CODED DIAL	MODE 3
			*00=REGULAR TX
< >	9.	Press the arrow buttons to display ORIG RELAY TX.
			CODED DIAL	MODE 3
			*00=ORIG RELAY TX
	10.	Press START/COPY.
			CODED DIAL	MODE 3
			DATA ENTRY OK

11. Use the numeric keypad to enter the group number of the relay fax.

CODED	RELAY TX
*00=GROUP #	00

12. Press START/COPY.

CODED	RELAY TX
DATA ENTRY OK

13. To register additional fax numbers for relay sending, begin again from step 5. Otherwise, press STOP.

Special Sending Procedures

Chapter 10 Special Sending Procedures 10-9