Canon MP 1000 manual Press the arrow keys to change the density

< > 2. Press the arrow keys to change the density.

❏Press < to darken the image and press > to lighten the image.

DOCUMENT READY

3. Dial the number of the receiving fax.

TEL = 15164886700

❏ Use the numeric keypad to enter the number. See page 3-3 for details.

❏You can also use any of the automatic dialing methods described in Chapter 6, Using Automatic Dialing.

4. Press START/COPY.

The MultiPASS 1000 begins sending the document.

TRANSMITTING OK

❏The MultiPASS 1000 beeps once to indicate that the document has been sent successfully.

❏If an error occurs during sending, the MultiPASS 1000 beeps intermittently for a few seconds. If this happens, try sending the fax again.

❏The MultiPASS 1000 automatically redials if the receiving fax machine does not answer or if the line is busy. (You can specify the number of times it redials; see Auto Redial, on page 5-17.)

❏To stop sending before the fax is finished, press STOP. You may need to lift the operation panel to remove the document. If so, be sure to close the operation panel and press STOP again.

❏If the ALARM light is flashing for any reason, correct the problem and then press STOP. If necessary, see Chapter 14, Troubleshooting.

Sending Fax Documents

Chapter 5 Sending Fax Documents 5-5