Canon MP 1000 manual Setting Up Special Transmission Procedures, ECM Sending

5. Press START/COPY.

<	>	6. Press the arrow buttons to select the density you use most
		often.

7. Press START/COPY.

DENSITY CONTROL

DATA ENTRY OK

8. Press STOP.

Setting Up Special Transmission Procedures

The TX SETTINGS menu of your MultiPASS 1000 includes options for ECM sending and auto redial.

ECM Sending

Your MultiPASS 1000 incorporates Error Correction Mode (ECM), an automatic feature that greatly reduces system and line errors when sending documents. To communicate with the ECM feature, the receiving fax must also have ECM. If the receiving fax has ECM, your MultiPASS 1000 automatically switches to ECM and the LCD display shows:

ECM TX

If the receiving fax does not have ECM, you can communicate normally using any procedures described in this manual.

Sending Fax Documents

Chapter 5 Sending Fax Documents 5-15