Canon MP 1000 manual Removing Jammed Paper from the Printer Area

3.Remove the paper from the cassette.

❏Fan the paper and tap it on a flat surface to even out the stack.

❏Then reinsert the paper into the cassette making sure to push it down under the tabs at the back of the cassette.

❏Make sure the thickness of the stacked paper is less than 3/4 inch (20 mm). (Use plain white, 20 lb paper.)

4.Insert the paper cassette until it is securely in place.

❏Make sure the slot for the paper cassette is free of any jammed paper.

5. Press STOP to clear the LCD display and turn off the ALARM light.

If you cannot reach the jammed paper from the paper cassette slot, lift the top cover and check for the paper. (See the next section.)

Removing Jammed Paper from the Printer Area

1.Open the printer cover.

❏The cartridge moves to the left (it may already be in the left position). Wait until the cartridge holder stops moving.

2.Gently pull the jammed paper out. (See the illustration on the next page.)

❏Make sure the printer light is off.

❏If the cartridge is not all the way to the left and the paper is jammed there, gently move the cartridge left and remove the paper.

Troubleshooting

Chapter 14 Troubleshooting 14-3