Canon MP 1000 manual Allowing Others to Poll Your MultiPASS, Polling at a Preset Time

Allowing Others to Poll Your MultiPASS 1000

Use this procedure to allow others to call your MultiPASS 1000 to receive a document. Your polling ID must be 11111111 or the other fax must be a Canon fax and must have your polling ID registered.

ANS HOOK UP 1. Press the ANS HOOK UP/MANUAL button.

MANUAL

❏ Both the ANS HOOK UP and MANUAL lights should be off. If they are not off, press the ANS HOOK UP/MANUAL button again until both lights are off.

2.Make sure you make the appropriate settings for sending the fax.

NRemember the receiving fax has no control over the document settings (such as density control, type of document).

3.Place the document into the Automatic Document Feeder (ADF).

Your MultiPASS 1000 sends the document when it receives a polling request from the other fax.

To cancel polling before the MultiPASS 1000 sends the document, remove the document from the feeder.

NTo turn off this feature, set your ID to 00000000.

Polling at a Preset Time

Use this procedure to request a document from another fax at a preset time.

1. Press FUNCTION.

SELECT MENU

2.Press DELAYED POLLING on the one-touch speed dialing keypad.

DELAYED POLLING
SET TIME	15:24

Special Sending Procedures

Chapter 10 Special Sending Procedures 10-19