Canon MP 1000 manual 8Using the Telephone, an Answering Machine, and a Modem

7. Press START/COPY.

ANS/FAX SWITCH TIME

4

8. Press the numeric buttons to enter the number of seconds you want the MultiPASS 1000 to wait before switching to automatic receiving.

❏ You can choose from 1 to 99 seconds. The number of seconds you choose must be less than the time it takes the answering machine to hang up the phone after the caller finishes leaving a message. (This will depend on the model of the answering machine.)

❏In this example, the MultiPASS 1000 will switch to fax mode after four seconds of silence.

9. Press START/COPY.

ANS/FAX SWITCH TIME

DATA ENTRY OK

10. Press STOP.

NIf your answering machine does not record at all or does not finish recording the voice message, change the ANS/FAX SWITCH to OFF. When the ANS/FAX SWITCH is set to OFF, the MultiPASS 1000 switches to automatic receiving only for fax machines that use CNG (calling tone). Some fax machines (especially older models) do not send a CNG tone. In this case, you need to set the ANS/FAX SWITCH to ON.

8-8Using the Telephone, an Answering Machine, and a Modem Chapter 8