Canon MP 1000 manual Receiving Documents Automatically Over a Dedicated Fax Line

< > 6. Press the arrow buttons to change the setting to OFF.

FAX/TEL SWITCH

OFF

7. Press START/COPY.

FAX/TEL SWITCH

DATA ENTRY OK

8. Press STOP.

Receiving Documents Automatically Over a Dedicated Fax Line

N

ANS HOOK UP

MANUAL

When the MultiPASS 1000 is set up for a dedicated line, it automatically receives documents whenever a call comes over the fax line.

The MultiPASS 1000 cannot receive automatically if you are making copies, printing reports, or registering information.

1.Make sure the MultiPASS 1000 is set to receive over a dedicated fax line.

2.Press the ANS HOOK UP/MANUAL button.

❏Make sure both the ANS HOOK UP and MANUAL lights are off.

The MultiPASS 1000 assumes all incoming calls are from another fax machine sending a document. It receives the documents automatically.

❏The MultiPASS 1000 receives documents in memory if the paper runs out or if the ink cartridge runs out of ink. (See Receiving Documents in Memory on page 7-7.)

❏To stop receiving before the document is complete, press

STOP.

❏If the ALARM light is flashing for any reason, correct the problem and then press STOP. If necessary, see Chapter 14, Troubleshooting.

Receiving Fax Documents

Chapter 7 Receiving Fax Documents 7-3