<>

<>

N

8.Press the arrow buttons until the type of ringing pattern you want to set appears. Choose from:

1.NORMAL RING

2.DOUBLE RING 3.SHORT-SHORT-LONG 4.SHORT-LONG-SHORT 5.OTHER RING TYPE

9.Press START/COPY.

DOUBLE RING

FAX

10.Press the arrow buttons until the communication type you wish to assign to the ring pattern just selected appears. Choose from:

TEL—Ringing pattern assigned to telephone number FAX —Ringing pattern assigned to fax number FAX/TEL SWITCH—Ringing pattern assigned to shared

fax/telephone number

11.Press START/COPY.

DOUBLE RING

DATA ENTRY OK

12.If you want to set the ringing pattern for other numbers, start again with step 8. Otherwise, press STOP.

When DRPD is set to ON, the communication type for each ringing pattern defaults to FAX. After you select the ringing pattern that has been assigned for your fax communications, you must set the other ringing patterns to TEL. Otherwise, the MultiPASS 1000 may answer as a fax for each ringing pattern.

9-8Using Special Dialing

Chapter 9

Page 164
Image 164
Canon MP 1000 manual 8Using Special Dialing