Canon MP 1000 manual Cleaning the Scanner Components, 13-2Maintaining the MultiPASS

Cleaning the Scanner Components

If you notice that documents you copy have black vertical lines (or if the receiving party complains that the documents you send are dirty), follow this procedure to clean the MultiPASS 1000 components.

1.Unplug the MultiPASS 1000 from the electrical outlet.

2.Lift open the operation panel.

❏Carefully reach into the document feeder area and pull the operation panel toward you.

OPERATION PANEL

BACK OF UNIT

3.Lift the white roller up as far as possible from the scanning glass.

❏Lift the roller on one side, either the right or left.

❏The roller comes up about 1/2 inch; it does not come all the way out.

13-2Maintaining the MultiPASS 1000 Chapter 13